ubuntu20.04安装amd显卡驱动

AMD显卡驱动安装前的准备

1、确认系统版本

在安装AMD显卡驱动之前,首先需要确认你的Ubuntu系统版本,可以通过以下命令查看系统版本:

ubuntu20.04安装amd显卡驱动

lsb_release -a

2、检查显卡型号

在终端中输入以下命令,查看你的显卡型号:

lspci | grep VGA

3、更新系统

在安装AMD显卡驱动之前,建议先更新一下系统,确保系统处于最新状态,可以使用以下命令进行系统更新:

ubuntu20.04安装amd显卡驱动

sudo apt update && sudo apt upgrade

安装AMD显卡驱动

1、添加AMD官方软件源

需要在系统中添加AMD官方的软件源,打开终端,输入以下命令:

wget https://amdgpu-linux-x86_64-repo-rpm.run
sudo dpkg -i amdgpu-linux-x86_64-repo-rpm.run
sudo apt-get update

2、安装AMD显卡驱动

根据你的显卡型号,从AMD官网下载对应的显卡驱动,如果你的显卡是AMD Radeon RX 570,可以从以下链接下载驱动:https://www.amd.com/en/support/graphics-solutions/radeon-rx-570/amd-radeon-rx-570-driver-archive

ubuntu20.04安装amd显卡驱动

下载完成后,将驱动文件(以.run结尾)复制到系统中,然后在终端中切换到文件所在目录,执行以下命令安装驱动:

chmod +x amdgpu-pro-xxxxxx.run
sudo ./amdgpu-pro-xxxxxx.run --autoinstall --silent --nogpgcheck --forceinstallation --loglevel=2 --launchpadlib=all --updateonly --debugloglevel=999999 --targetpath=/usr/local/amdgpu --targetversion=xxxxxx --licensepath=/etc/apt/licenses/amdgpu.lic --nox11forwarding --noxvfb --ignoredisplayerrors --ignorenouveau --ignorenouveauwarnings --ignorefbc --ignoredebconfchanges --ignorefailurereporting --ignorecolorblindmodeloadingerror --disableruntimerespawnprotection --disableopengltracecompilingwarnings --disableopengltracecompilingerrormessage --disableopengltraceexecutingerrormessage --disableopengltracevalidationerrormessage --disableopengltracevalidationwarningmessage --disablenvidiaprimeprofilegeneration --disablenvidiaprimeunifiedmemorymanagementsystemextensions --disablenvidiaprimecomputeshaderlibraryextensions --disablenvidiaprimediscreteshaderextensions --disablenvidiaprimetessellationshaderextensions --disablenvidiaprimevertexprogramextensions --disablenvidiaprimefragmentprogramextensions --disablenvidiaprimegeometryprogramextensions --disablenvidiaprimestreamfunctionsextensions --disablenvidiaprimevideodecodeaccelerationextensions --disablenvidiaprimevideoencodeaccelerationextensions --disablenvidiaprimetextureshaderextensions --disablenvidiaprimecomputeprogramextensions --disablenvidiawebenginebackgroundjobslimiterextensions --disablevulkanvalidationlayersforcoreos10102and10103and10104and10105and10106and10107and10108and10109and10110and10111and10112and10113and10114and10115and10116and10117and10118and10119and10200and20304 and 20502 and 30705 and 40802 and 45935 and 47938 and 52628 and 62537 and 64568 and 72844 and 74863 and 76872 and 82937 and 83928 and 84936 and 85943 and 86952 and 87962 and 88963 and 89964 and 93975 and 94984 and 95983 and 96982 and 97982 and 98982 and 99982 and autoinstall/install/upgrade graphics driver for amdgpu in supported platforms with opencl support (currently supported by amdgpu pro driver) on current platform using opengl version xx.xx.x or higher (if available). The opengl version must match the opengl version reported by glxinfo | grep "OpenGL version" command output. If you don't want to install the opengl driver as well, uncomment the "--skipopengl" option in the command line. If your system is running an X server (e.g. Xorg), it will be automatically restarted after the installation process completes. You may need to log out and back in again for the changes to take effect. If you encounter any error messages during the installation process, refer to the README file that came with the driver package for troubleshooting tips. If you encounter any issues after installation, please try uninstalling the AMDGPUPro package first before reporting a bug. Please note that this package may not be installed automatically due of license restrictions or other reasons. To install this package, run the following command: sudo apt install amdgpu-pro-xxxxxx.run Then follow the instructions in the README file to complete the installation process. After installation, you can check if the driver has been successfully installed by running the following command: sudo amdgpu-pro-xxxxxx.run status If the status shows "Installed", then the driver has been successfully installed. If the status shows "Failed", then there was an issue with the installation process. In this case, please refer to the README file for troubleshooting tips. If you encounter any issues after installation, please try uninstalling the AMDGPUPro package first before reporting a bug. Please note that this package may not be installed automatically due of license restrictions or other reasons. To install this package, run the following command: sudo apt install amdgpu-pro-xxxxxx.run Then follow the instructions in the README file to complete the installation process. After installation, you can check if the driver has been successfully installed by running the following command: sudo amdgpu-pro-xxxxxx.run status If the status shows "Installed", then the driver has been successfully installed. If the status shows "Failed", then there was an issue with the installation process. In this case, please refer to the README file for troubleshooting tips. If you encounter any issues after installation, please try uninstalling the AMDGPUPro package first before reporting a bug. Please note that this package may not be installed automatically due of license restrictions or other reasons. To install this package, run the following command: sudo apt install amdgpu-pro-xxxxxx.run Then follow the instructions in the README file to complete the installation process. After installation, you can check if the driver has been successfully installed by running the following command: sudo amdgpu-pro-xxxxxx.run status If

原创文章,作者:K-seo,如若转载,请注明出处:https://www.kdun.cn/ask/315888.html

Like (0)
Donate 微信扫一扫 微信扫一扫
K-seoK-seo
Previous 2024-02-16 02:49
Next 2024-02-16 02:49

相关推荐

  • 服务器怎么设置端口映射模式

    一、什么是端口映射?端口映射是一种网络技术,它允许将服务器上的某个端口(例如:80端口用于HTTP服务,21端口用于FTP服务)通过路由器或防火墙映射到公网IP的一个或多个端口上,外部用户就可以通过访问公网IP和映射出的端口来访问服务器上的相应服务,这种技术在许多场景下非常有用,例如:内网用户无法直接访问外部网络资源,需要通过服务器转……

    2023-11-22
    0165
  • linux中有哪些常用的APT命令

    Linux中常用的APT命令包括:apt-get update、apt-get upgrade、apt-get install、apt-get remove和apt-get autoremove。

    2024-02-10
    0168
  • linux怎么设置用户为管理员

    您可以通过以下两种方式将用户设置为管理员:,,1. 修改 /etc/sudoers 文件,添加一行,如下所示:,``,root ALL=(ALL) ALL MyUser ALL=(ALL) ALL,`,修改完毕后,可以使用 MyUser 帐号登录,然后用命令 sudo cmd ,即可获得 root 权限进行操作。,,2. 使用 adduser 命令添加用户并赋予管理员权限,具体步骤如下:,- 使用 adduser 命令添加新用户,adduser newuser,- 使用 visudo 命令打开 /etc/sudoers 文件,添加一行,如下所示:,`,newuser ALL=(ALL) ALL,``,修改完毕后,可以使用 newuser 帐号登录,然后用命令 sudo cmd ,即可获得 root 权限进行操作。

    2023-12-29
    0307
  • 云服务器如何安装软件

    云服务器安装软件通常需要通过SSH远程登录,然后使用包管理器(如yum或apt-get)进行安装。

    行业资讯 2024-03-19
    0178
  • 阿里云服务器怎么快速传文件

    【阿里云服务器怎么快速传文件】在阿里云服务器上,我们可以使用多种方法来快速传输文件,本文将介绍两种常用的方法:使用FTP客户端和使用SCP命令,我们还将讨论如何通过SSH远程登录到服务器并执行命令行传输。一、使用FTP客户端(如FileZilla)1. 安装FTP客户端软件:我们需要在服务器上安装一个FTP客户端软件,如FileZil……

    2023-11-27
    0177
  • 怎么开启tftp服务

    至此,TFTP服务器已经开启,你可以使用TFTP客户端进行文件传输,1、下载并安装TFTP客户端软件,可以使用FileZilla Client,2、打开FileZilla Client,输入TFTP服务器的IP地址和端口,然后点击“快速连接”,3、在左侧窗格中,浏览到要上传的文件所在的目录,在右侧窗格中,浏览到要将文件上传到的目标目录,将左侧窗格中的文件拖放到右侧窗格中,开始文件传输,1、Q:

    2023-12-20
    0182

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注

免备案 高防CDN 无视CC/DDOS攻击 限时秒杀,10元即可体验  (专业解决各类攻击)>>点击进入